MOLEX CONNECTOR POWER SUPPLY SERIES

The first thing to do is to choose an adapter that’s properly manufactured. It’s a 1TB drive that installs quickly and painlessly. If you’re interested in going this route, check out our review of the Kingston KC2000. On the other hand, it also ties up one of your PCI Express slot, limiting your options for future upgrades. Some newer SSDs plug directly into your PCI Express slot, eliminating the need for a SATA cable altogether. Then plug your hard drive into the other end, and you’re good to go.Īs SSD drives have gotten smaller and smaller, you actually have a third option. Instead, all you need to do is plug the adapter into your PSU. By going this route, you won’t need to worry about swapping out your power supply. Replacing a power supply is equivalent to major surgery.Īnother option is to use a molex to SATA adapter cable. Adding a hard drive is a relatively painless, plug-and-play operation. This is especially true if you’re adding a drive to an existing build. But upgrading your PSU isn’t always a convenient option. This way, you can get the SATA connections you need. Molex has since discontinued the 8981 series, but the original Mate-n-Lok connectors remain available from TE Connectivity.One option is to simply purchase a newer PSU.

MOLEX CONNECTOR POWER SUPPLY SERIES

The Molex 8981 series was only produced in a 4 position option, unlike the Mate-n-Lok family which includes many other contact arrangements. In 1983, Molex introduced the 8981 connector under the trademark Disk Drive Power Connection System, which was fully compatible with the AMP Mate-n-Lok connector. This connector became the standard for 5.25-inch format peripherals such as hard drives and was used until introduction of SATA drives. The first 5.25-inch floppy disk drive, the Shugart SA400, introduced in August 1976, used the AMP Mate-n-Lok connector part number 350211-1. Both were widely used in the computer industry and the term 'Molex connector' is often inaccurately used to refer to all nylon plugs and receptacles.

The AMP connector was similar to the patented Molex connectors but not interchangeable. In October 1963, AMP (now TE Connectivity) introduced the Mate-n-Lok connector. Molex Standard 0.093-inch pin and socket connectors Molex Disk Drive Power Connection System tool and connectors Because the pins have a large contact surface area and fit tightly, these connectors are typically used for power. The 1.57 mm pin can carry 5 A of current, while the 2.36 mm can carry 8.5 A. Pins and sockets can be arranged in any combination in a single housing, and each housing can be either male or female. The connector typically has 2 to 24 contacts and is polarized or keyed to ensure correct orientation. The pins and sockets are held in a rectangular matrix in a nylon shell. In such a connector, cylindrical spring-metal pins fit into cylindrical spring-metal sockets. AMP Mate-n-Lok and Molex Standard 0.093-inch pin and socket power connectors First used in home appliances, other industries soon began designing it into their products from automobiles to vending machines to minicomputers. Molex developed and patented the first examples of this connector style in the late 1950s and early 1960s. Pioneered by Molex Connector Company, the two-piece design became an early electronic standard. Molex connector is the vernacular term for a two-piece pin and socket interconnection.

Molex connector power supply